F100 Chain Cleaner

Gel formula for powerful and fast chain cleaning

The Problem:

While the bike is in motion, there is permanent friction between the chain and the gear, and also between the chain links. This causes fine metal abrasion and, as a result, the chain gets dirty. Such soiling, coupled with the residue of the chain lubricants, sand, road dirt etc., form a tough layer of dirt on the chain and gear. This significantly accelerates wear and tear. Using more lubrication is ineffective, as the lubricant can no longer penetrate the chain.

Product Advantages:

• The F100 Chain-Cleaner combines outstanding penetrability during spraying with perfect adhesion as the product acts on the material (thixotropy)

• Self-cleaning gel formula

• Improves running properties of the chain by dissolving dirt particles
• Special additive for corrosion protection prevents wear and tear and corrosion of chain,crank and cartridge
• Acid-free, does not damage any surfaces

Application Areas:

For the bicycle chain, chain rings, gear, rim etc.

Application:

Shake can before use. Apply F100 Chain-Cleaner to the chain and allow to act for approx. 5-10 minutes (no more than 15 min). In the case of heavy soiling, clean chain links using a brush (not a wire brush). Then, spray the chain again and thoroughly rinse it with a strong water jet. Afterwards, lubricate dry chain using F100 Chain-Oil.

Please note: Product may not be applied to brake discs, brake pads or tyre treads (risk of accident!). If product accidentally touches these bike parts, wash off immediately.

DANGER
Contains 2-Propylheptanolethoxilate, Hydrocarbons, C10 aromatics. Extremely flammable aerosol. Pressurised container: May burst if heated. Causes serious eye damage. May cause drowsiness or dizziness. Toxic to aquatic life with long lasting effects. Repeated exposure may cause skin dryness or cracking. If medical advice is needed, have product container or label at hand. Keep out of reach of children. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Do not pierce or burn, even after use. Do not breathe spray. Do not spray on an open flame or other ignition source. Use only outdoors or in a well-ventilated area. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Protect from sunlight. Do not expose to temperatures exceeding 50° C/122° F. Dispose of contents/container in accordance with local/regional/national/international regulations. Repeated exposure may cause skin dryness or cracking.